bema_Jumbo_Header_1920x575.jpg

bema Jumbo

Heavy weight for heavy duty deployment

Convincing cleaning action with a main brush diameter of 920 mm

The huge and extremely powerful bema Jumbo masters tough conditions on the construction site, in recycling yards and surface mining/extraction operations, at airports, inland ports and seaports or in the field of snow and ice clearance. Thanks to its robust construction and particularly strong attachment, this free sweeping machine is ideally suited for use on heavy carrier vehicles.

Features

Extremely powerful cleaning performance as a result of the PPN power brush Ø 920 mm:

Above average brush diameter as well as the honeycomb broom rings guarantee convincing results.

The free sweeping version in extremely stable construction:

An indestructible tool that gives the driver a good overview from the vehicle.

On rough terrain, the bema Jumbo optimally adapts to the the ground:

The bema Jumbo is optimally guided by the roller level compensation including a height indicator and pneumatic wheels (Ø 460 x 145 mm) or optional super-elastic solid rubber wheels.

Can be used in a variety of applications:

The drive can either be carried out mechanically including a drive shaft or hydraulically by means of a strong internal gerotor motor via a chain.

Secured hydraulic system:

Flow control valve, pressure relief valve and protection against overrun.

Application purpose

Free sweeping

Carrier vehicle
Wheel loader from 12 t
Tractor (front)
Tractor (rear)
Working width
2750 mm | 3000 mm | 3250 mm | 3500 mm
Equipment (optional/standard)

Mechanical drive

bema Control

Water spray unit

Hydraulic swivel device

Technical Data

Machine typebema Jumbo
Working width2750 mm3000 mm3250 mm3500 mm
DriveHydraulic drive, powerful Gerotormotor with drive shaft Ø 32 mm
(completely inside, heavy series);
optional mechanical drive incl. drive shaft (simplex chain)
or reinforced mechanical drive incl. drive shaft (duplex chain)
Minimum hydraulic power of the carrier vehicle60 l/min
Weight basic version (approx.)960 kg986 kg1.025 kg1.054 kg
Main brushØ 920 mm;
PPN BEE-LINE power brush with honeycomb brush rings;
toolless and stepless adjustment of the main brush via adjustment spindle
Brush speedRecommended 80 to 120 rpm
WheelsPneumatic tyres or optional super-elastic solid rubber wheels Ø 460 x 145 mm;
height-adjustable
Water spray unitSelectable special equipment;
400 l water tank, tank filter and 12/24 Volt pressure pump
(direct injection of water into the main brush)
Optional equipmentHydraulic swivel device (20° to the left/right);
bema Control (control unit) incl. wireless remote controller (from 3 functions available);
Print datasheet

Geht nicht - gibt's nicht!

 

Bei einigen Aufgaben und Anwendungen reicht das bema Standardprogramm nicht aus, um Ihre Anforderungen optimal zu erfüllen.
In diesen Fällen können wir Ihnen eine Vielzahl von Sonderbaulösungen anbieten.