bema Suction sweeper
An outstanding solution
Much more than just removing leaves
At demopark 2019, the bema suction sweeper was awarded the silver medal as a technical innovation. Since then it has been used on yard loaders, municipal vehicles and compact tractors. No matter if leaves, green waste, waste or other garbage, the oscillating infeed roller ensures a trouble-free infeed. For convincing cleaning results, a fully-fledged sweeping roller was installed. This roller also removes stuck sweeping material from the surface before suction. Like the sweeping roller, the guide wheels are height-adjustable, so that different surfaces are no problem.
As part of the new product line, the bema suction sweeper offers a wide range of possible combinations. The suction sweeper is available with or without chaff blower and can be combined with existing suction containers or trailers as well as with the new bema tipping container. Here you can see a selection of possible combinations
Make an appointment for a demonstration with your bema dealer and have your individual attachment solution put together.
Alternatively, we can also forward your request to the responsible sales partner. In this case we look forward to hearing from you.
A fully fledged main brush for convincing cleaning results:
The fully-fledged, hydraulically driven main brush Ø 200 mm ensures that firmly stuck leaves and dirt are loosened before being sucked up (hose Ø 200 mm).
Variable in use:
The bema Suction Sweeper is available with or without a chaff blower. Depending on the carrier vehicle, the turbine can be driven hydraulically (no further control circuit is required) or mechanically via the drive shaft of the carrier vehicle.
Convincing performance on various surfaces:
Guide wheels and the main brush are height-adjustable for optimum use on various surfaces, e.g. sports fields, parks, water-bound paths, sealed surfaces.
New and innovative combination:
The bema Suction Sweeper was awarded the silver medal at demopark 2019.
Combination sweeping / suctioning
Working width1200 mm; with two rotary side brushes extendable to 1800 mm
Rotary Side brush
|Machine type||bema Suction sweeper|
|Working width||1200 mm;|
with two rotary side brushes extendable to 1800 mm
|Drive||Hydraulic drive via chain, gerotor motor with drive shaft Ø 25 mm;|
Optional mechanical drive for sweeping roller (540 / 1000 or 2000 rpm depending on carrier vehicle, not in combination with mechanically driven chaff blower)
|Minimum hydraulic power of the carrier vehicle||20 l/min bema Suction Sweeper without chaff blower;|
30 l/min bema Suction Sweeper with two rotary side brushes;
50 l/min bema Suction Sweeper with chaff blower and rotary side brushe(s);
|Weight without / with chaff blower (approx.)||140 kg / 200 kg|
|Main brush||Ø 200 mm;|
PPN (V-shaped arrangement), stepless adjustable
|Brush speed||Recommended 100 to 150 rpm|
|Wheels||Heavy duty wheels, rear wheels Ø 200 x 50 mm and front wheel Ø 250 x 50 mm (height-adjustable, railsafe)|
Optional Super-elastic wheels (rear wheels Ø 200 x 80 mm / front wheel Ø 250 x 80 mm)
|Rotary side brushes||Selectable special equipment;|
Ø 600 mm;
hydraulic drive incl. bema SideControl (comfort operation, combines 3-way valve and speed controller);
rotary side brushes are available for the right and/or left side.
Selectable brushes: PPN, steel/PPN, steel flat wire/PPN, steel flat wire, weed brush
|Further details||Downholder roller (feed roller) Ø 140 mm, pendulum suspension|
|Chaff blower||Turbine casing Ø 450 mm mountable on different positions;|
Speed of chaff blower 3500 rpm, hydraulic drive.
Hydraulic drive by orbital motor (min. 50 l/min oil required, separate oil connection for drive recommended).
Optional mechanical drive of the turbine via cardan shaft (540, 1000 or 2000 rpm depending on carrier vehicle, min. 22 KW/30 PS).
Ejection nozzle and connecting hose Ø 200 mm incl. two hose clamps.
Optional steel wear plate
|bema tipping container||Rear attachment three-point trestle Cat. I//II;|
Dumping height at least approx. 1500 mm, capacity approx. 1350 liters, weight approx. 360 kg;
Connection nozzle Ø 200 mm;
Material GFK, pneumatic tired wheels Ø 310 x 115 mm;
Lighting and license plate holder according to road traffic regulations (StVZO);
At least 1 double-acting control circuit required for emptying the container
|combination possibilities||bema suction sweeper with chaff blower (front) in combination with bema tipping container in the rear;|
bema suction sweeper with chaff blower (front) in combination with existing collection trailer at the rear (external system);
bema suction sweeper (front) in combination with bema tipping container and chaff blower in the rear;
bema suction sweeper (front) in combination with existing suction container in the rear (external system);
Mower unit (front / external system) in combination with bema tipping container and chaff blower in the rear;
Complete rear unit consisting of bema suction sweeper, chaff blower and bema tipping container;
Complete rear unit can be combined with other front attachments, e.g. bema Groby light, sweeper
Bei einigen Aufgaben und Anwendungen reicht das bema Standardprogramm nicht aus, um Ihre Anforderungen optimal zu erfüllen.
In diesen Fällen können wir Ihnen eine Vielzahl von Sonderbaulösungen anbieten.