Sweeper

Sweeper Professionals

bema Titan Dual

bema Titan Dual

sector:

agriculture , construction industry , industry

vehicles:

  • wheel loaders from 12t

working width:

2750 mm, 3000 mm, 3250 mm, 3500 mm

 

• Above average dimensions: brush barrel ø 920 mm with high durability

Greatest possible protection: Premium Hydroblock with all necessary
  power units (also additional fl ow-control valve -up to a power density of 220 L/min- ,
  load-sensing safety valve as well as the ability to connect an additional
  electrical two-way valve)
Reliable and durable: fully enclosed maintenance-free gerotor motors
Flexible in application without conversion work: thanks to our Dual system
Optimum running over uneven ground: wheels ø 460 x 145 mm (pneumatic tyres)
  and 3D roller-level balancing with the "bema-Meter" height-control display
Continuous use without interruptions: enormous waste collection container hydraulic with two guiderollers ø  460 x 145 mm (pneumatic tyres)                          

Picture Gallery

bema Titan Dual
bema Titan Dual with opened collection container
bema Titan Dual
bema Titan Dual with water spray unit and side brush
bema Titan Dual
bema Titan Dual side view
bema Titan Dual mit hochklappbarem Seitenkehrbesen
bema Titan Dual with hydraulic upward-folding dise brush
bema Titan Dual Sammelwannenentleerung
bema Titan Dual collection container emptying
Please always indicate your choice: copyright © bema GmbH Maschinenfabrik

technical data:

Machine type

Working width

bema Titan Dual
2750 mm
bema Titan Dual
3000 mm
bema Titan Dual
3250 mm
bema Titan Dual
3500 mm
Drive

two gerotor motors, drive shaft Ø 32 mm (fully enclosed, heavy-duty series)

Hydraulic power of the carrying vehicle at least 80 L/min
Collection container volume approx. 1.060 L approx. 1.155 L approx. 1.250 L approx. 1.350 L
Weight excl. special fixtures approx. 1.770 kg approx. 1.826 kg approx. 1.885 kg approx. 1.964 kg
Collection container weight approx. 495 kg approx. 512 kg approx. 541 kg approx. 561 kg
Main brush barrel Ø 920 mm (PPN power brush with honeycomb brush rings)
Brush barrel speed recommended 80 – max. 120 rpm
Wheels pneumatic, Ø 460 x 145 mm
Rotary side brushes Ø 800 mm, hydraulic drive (PPN-, steel/PPN-, steel flat wire/PPN or steel flat wire trim)
Water spray unit 400 L water tank, tank filter and 12/24 V pressure pump
(direct injection of water into brush barrel and side brushes)

technical data and wheight are approximately and without commitment.