bema 85 Dual PowerMaster
MORE POWER TO YOU
Power meets efficiency – for maximum performance
Ready for more power? The new high-performance sweeper bema 85 Dual PowerMaster combines maximum sweeping power with a perfectly matched volume and exceptionally robust wheels – ideal for demanding continuous use. Powerful, efficient and cost-effective – designed to tackle demanding cleaning tasks in any environment.
MARKT LAUNCH 2026:
Get informed now at bema or your specialist dealer!
Features
Maximum operating time with full sweeping power:
Main brush with 800 mm diameter and a optimally capacity of the cMain brush with 800 mm diameter and the optimally capacity of the collection container enables extended cleaning intervals without the need for emptying.
Reliable control and performance:
The hydro block integrates all hydraulic control and safety components including pressure relief valve, overrun protection for the main brush, switching valve for the Dual collection container and connection ports for the side brushes Available as a premium version with flow control valve (up to 220 l/min), load-sensing system and an additional electric 2-way valve Internal gerotor motors ensure low-wear, high-performance operation even under intensive use-
Reliable sweeping results on any surface:
Robust wheels with reinforced wheel brackets ensure smooth operation, while the 3D roller level compensation and swivel joint effectively balance out uneven ground.
Flexible sweeping without changeover:
Thanks to the Dual system, switching between free-sweeping and collecting operation is possible at any time.
Application purpose
Free sweeping | Sweeping & taking up dirt | Combination scraping / free sweeping | Combination scraping / free sweeping / high-pressure | Combination scraping / sweeping / collecting dirt
Carrier vehicle
Wheel loader 7 t to 12 t
Wheel loader from 12 t
Tractor (front)
Telehandler
Working width
2300 mm | 2600 mm | 2800 mm | 3200 mmEquipment (optional/standard)
bema Scraper unit
bema High pressure water unit
Rotary Side brush
Water spray unit
Hydraulic swivel device
Technical Data
| Machine type | bema 85 Dual PowerMaster | |||||
| Working width | 2300 mm | 2600 mm | 2800 mm | 3200 mm | ||
| Attachment systems | Wheel loader attachment quick change adapter with roller level compensation and hight control indicator; „bema-Meter“; Forklift attachment pallet forks with roller levelling and quick clamps, pocket size 180 x 80 mm (swivelling); Tractor front linkage attachment with roller level compen-sation and hight control indicator „bema-Meter“, three point attachment or collection in quick action triangle mode; Combi attachement forklift and tractor front (others on demand) | |||||
| Drive | Hydraulic drive, two powerful Gerotormotors with drive shaft Ø 32 mm, completely inside (heavy series / industrial version) | |||||
| Minimum hydraulic power of the carrier vehicle | 50 l/min | 60 l/min | 70 l/min | 80 l/min | ||
| Volume / weight collection container Dual (approx.) | 585 l / 260 kg | 665 l / 270 kg | 715 l / 280 kg | 815 l / 300 kg | ||
| Main brush | Ø 800 mm Selectable brushes: PPN (spiral trim), snow brush (PPN spiral segments), steel fl at wire/PPN (spiral trim). toolless and stepless adjustment of the main brush via adjustment spindle | |||||
| Brush speed | Recommended 100 to 140 rpm | |||||
| Wheels | Super-elastic wheels Ø 400 x 111 mm, Heavy duty (load capacity 960 kg at 6 km/h) | |||||
| Rotary side brush (optional) | Ø 780 mm; Hydraulic drive including bema SideControl (comfort operation, combines 3-way valve and speed controller), rotary side brushes are available for the right and/or left side, selectable brushes: PPN, steel fl at wire/PPN or steel fl at wire | |||||
| Water spray unit (optional) | 240/400 litres water tank, tank filter and 12/24 volts pressure pump (direct injection of water into the main brush and rotary side brushes) | |||||
| Other equipment (optional) | Hydraulic swivel device (20° to the left/right); Scraper unit without/with collection container; bema HP/MP pressure water units (120 bar or 50 bar); bema Control (from 3 functions available); | |||||
| Further details | Further attachments and equipments, as well as special constructions on request. Technical data and weight measurements are approximate and non-binding. Weight measurements without special equipments and attachment. Mistakes and errors reserved. | |||||
