bema 3 Robust

Combats dirt, without compromise

Main brush Ø 640 mm with different trims

In a free sweeping version, the bema 3 Robust is the ideal partner for robust use on the construction site thanks to its internal motor and stable wheels. Mounted on a wheel loader, tractor or Unimog truck, the main brush with a diameter of 640 mm also beats the the most stubborn of dirt.


Long service life as a result of the main brush Ø 640 mm:

With different trims depending on the requirement.

Simple handling and a high working load:

Tool-free adjustment of the sweeping roller as a result of adjusting the super-elastic wheels Ø 250 x 80 mm via locking pins.

A free sweeping version with optimum adaptation to the ground:

3D carrier vehicle mount with horizontal and vertical roller level compensation including a height indicator for optimum guidance of the sweeper.

Secures reliably:

Pressure relief valve and protection against overrun.

Durable and space-saving:

Completely internal, maintenance-free powerful gerotor motor.

Sweep where the truck cannot travel:

Thanks to the hydraulic lateral movement of 50 cm the left and right (optional).

Application purpose

Free sweeping

Carrier vehicle
Wheel loader 7 t to 12 t
Wheel loader up to 7 t
Tractor (front)
Tractor (rear)
Unimog truck
Working width
2050 mm | 2300 mm | 2600 mm | 2850 mm
Equipment (optional/standard)

Mechanical drive

bema Control

Water spray unit

Hydraulic swivel device

Hydraulic lateral movement

Technical Data

Machine typebema 3 Robust
Working width2050 mm2300 mm2600 mm2850 mm
Attachment systemsWheel loader attachment quick hitch with roller level compensation and hight control indicator „bema-Meter“;
Forklift attachment pallet forks with roller level compen-sation and hight control indicator „bema-Meter“ and quick clamps, pocket size 180 x 80 mm, swivelling;
Tractor attachment front loader with roller level compensation and hight control indicator „bema-Meter“ (European standard);
Tractor front linkage attachment with roller level compen-sation and hight control indicator „bema-Meter“, three point attachment or collection in quick action triangle mode;
Tractor rear mount with balancing system and 3-point attachment.;
Unimog-truck lift attachment for existing winter service plate;
Combi attachment forklift and tractor front, (others on demand)
DriveHydraulic drive, powerful Gerotormotor with drive shaft Ø 32 mm
(completely inside, heavy series);

optional mechanical drive incl. drive shaft
Hydraulic drive, two powerful Gerotormotors with drive shaft Ø 32 mm
(completely inside, heavy series);

optional mechanical drive incl. drive shaft
Minimum hydraulic power of the carrier vehicle40 l/min40 l/min60 l/min60 l/min
Weight basic version (approx.)380 kg400 kg436 kg456 kg
Plus weight protective cover (approx.)22 kg25 kg27 kg29 kg
Main brushØ 640 mm;
steel/PPN mixture brush (spiral segments), PPN or snow brush PPN;
special equipment: steel flat wire/PPN mixture brush
Brush speedRecommended 100 to max.150 rpm
WheelsSuper-elastic wheels Ø 250 x 80 mm (railsafe)
Water spray unit (optional)240/400 litres water tank, tank filter and 12/24 volts pressure pump
(direct injection of water into the main brush)
Other equipment (optional)Hydraulic swivel device (20° to the left/right);
hydraulic lateral movement (500 mm to the left/right)
bema Control (control unit) incl. wireless remote controller (from 3 functions available);
Further detailsFurther attachments and equipment, as well as special constructions on request.
Technical data and weight measurements are approximate and non-binding.
Weight measurements without special equipment and attachment.
Mistakes and errors reserved.
Print datasheet

Geht nicht - gibt's nicht!


Bei einigen Aufgaben und Anwendungen reicht das bema Standardprogramm nicht aus, um Ihre Anforderungen optimal zu erfüllen.
In diesen Fällen können wir Ihnen eine Vielzahl von Sonderbaulösungen anbieten.