bema Snow-plough series 1100

Relentlessly against snow

The large blade with maximum clearance performance

bema snow ploughs were developed for use on a wide variety of carrier vehicles. Through optimum adaptation to the ground, low-wear polyurethane clearing blades ensure that the snow is cleared without damaging the pavement. The stability of the snow plouhs is achieved by lateral and upper edges on the body of the plough. The individual selection of basic equipment provides greater flexibility.


Full flexibility that can be upgraded at any time:

The basic version consists of a basic clearing blade in a torsion-resistant steel design with a particularly strong polyurethane mounting. For greater flexibility, the equipment can be upgraded as required: Variant 1 - Spring flap segements and wheels Variant 2 - Spring flap segements and skid plates

Protection against damage:

The elastic edge protection prevents damage to kerbstones and the abutments of buildings.

Robust construction for a long-term use:

Stability due to lateral and upper edges on the body of the blade, torsion-resistant design.

Convenient clearing adjustment and optimum adaption to the ground:

Mechanical or optional hydraulic swivel device 30° via two stable hydraulic cylinders. The roller level compensation and the infinitely variable adjustment of the running wheels/skids guarantee precise clearing results.

Application purpose


Carrier vehicle
Wheel loader 7 t to 12 t
Wheel loader up to 7 t
Tractor (front)
Unimog truck
Working width
2250 mm | 2500 mm | 2750 mm | 3000 mm | 3500 mm
Equipment (optional/standard)

Hydraulic swivel device

Technical Data

Machine typebema Snow-plough series 1100
Working width2250 mm2500 mm2750 mm3000 mm3500 mm
Clearing width (about all)2275 mm2520 mm2765 mm3010 mm3510 mm
Clearing width swivelled at 30°1970 mm2180 mm2395 mm2610 mm3035 mm
Standard height / depth (total)1000 mm / 900 mm
Attachment systemsWheel loader attachment quick hitch with roller levelling system;
Forklift attachment incl. roller levelling system
Tractor front linkage attachment for quick change and three point;
Three point linkage for tractor mounting Cat. II with pendulum compensation;
Tractor mounted front power lifter with oscillation power compensation, three point attachment or collection in quick action triangle mode;
Unimog-Truck lift attachment for existing winter service plate
Description basic versionClearing blade with polyurethan trim 50 x 200 mm (depth x height, one segment)
Weight basic version (approx.)370 kg390 kg410 kg435 kg500 kg
Description version 1Spring flap segments with polyurethan trim 20 x 150 mm (depth x height, separate segments);
optional rubber blade with corundum;
stepless height-adjustable super-elastic wheels Ø 200 x 80 mm or Ø 250 x 80 mm
Weight version 1 (approx.)445 kg465 kg490 kg510 kg575 kg
Description version 2Spring flap segments with polyurethan trim 20 x 150 mm (depth x height, separate segments);
optional rubber blade with corundum;
stepless height-adjustable skid plates Ø 230 mm
Weight version 2 (approx.)400 kg425 kg445 kg470 kg530 kg
Standard equipmentMechanische Schwenkeinrichtung
Other equipment (optional)Hydraulic swivel device links/rechts je 30° by 2 cylinders with/without overload protection
Further detailsFurther attachments and equipment, as well as special constructions on request.
Technical data and weight measurements are approximate and non-binding.
Weight measurements without special equipment and attachment.
Mistakes and errors reserved.
Print datasheet

Geht nicht - gibt's nicht!


Bei einigen Aufgaben und Anwendungen reicht das bema Standardprogramm nicht aus, um Ihre Anforderungen optimal zu erfüllen.
In diesen Fällen können wir Ihnen eine Vielzahl von Sonderbaulösungen anbieten.