bema Titan Dual

A giant when put to use

Main brush Ø 920 mm and a huge dirt collecting container Dual

Extreme performance, robustness and longevity - these are the requirements that bema Titan Dual users demand, even in the case of continuous use on large surfaces. Rough terrain is no problem due to roller level compensation with automatic tilt adjustment.


Maximum security:

The Premium Hydroblock contains all of the necessary units e.g. overpressure valve, overrun protection of the main brush, switch valve for the dirt collection container, connection possibility for rotary side brushes, flow control valve (up to a litre capacity of 220 l/min), a load sensing safety valve as well as a possibility to connect an additional electric 2-way valve.

Durable and high performance:

Completely internal, maintenance-free gerotor motors.

Optimum guidance on uneven ground:

Pneumatic wheels Ø 460 x 145 mm (optionally solid rubber) and 3D roller level compensation with a height control indicator "bema-Meter".

Sustained use without interruptions:

Huge hydraulic collection container with two support wheels Ø 460 x 145 mm (pneumatic tyres).

Flexible in use thanks to the dual system:

Easy switching between free sweeping and collecting dirt (no changeover time required)

Application purpose

Free sweeping | Sweeping & taking up dirt

Carrier vehicle
Wheel loader from 12 t
Tractor (front)
Working width
2750 mm | 3000 mm | 3250 mm | 3500 mm
Equipment (optional/standard)

bema Control

Rotary Side brush

Water spray unit

Hydraulic swivel device

Technical Data

Machine typebema Titan Dual
Working width2750 mm3000 mm3250 mm3500 mm
Attachment systemsWheel loader attachment quick hitch with roller levelling system;
Tractor front linkage attachment with roller levelling system
DriveHydraulic drive, two powerful Gerotormotors with drive shaft Ø 32 mm
(completely inside, heavy series)
Minimum hydraulic power of the carrier vehicle80 l/min
Volume / weight incl. collection container1060 l / 2265 kg1155 l / 2338 kg1250 l / 2426 kg1350 l / 2525 kg
Main brushØ 920 mm;
PPN Powerbürste mit Besenringen in Wabenform
Brush speedRecommended 80 to max. 120 U/min
WheelsØ 460 x 145 mm, pneumatic (7 bar, 8 PR);
optional in solid rubber
Rotary side brushes (optional)Ø 800 mm;
hydraulic drive incl. bema SideControl (comfort operation, combines 3-way valve and speed controller); rotary side brushes are available for the right and/or left side.
Selectable brushes: PPN, steel/PPN or steel flat wire.
Incl. hydraulic device for folding up of the rotary side brush
Water spray unit (optional)400 l water tank, tank filter and 12/24 Volt pressure pump
(direct injection of water into the main brush and rotary side brushes)
Other equipment (optional)Hydraulische Schwenkeinrichtung links/rechts je 20°;
Steuergerät bema Control inkl. Funk-Fernbedienung (ab 3 Funktionen);
Further detailsFurther attachments and equipment, as well as special constructions on request.
Technical data and weight measurements are approximate and non-binding.
Weight measurements without special equipment and attachment.
Mistakes and errors reserved.
Print datasheet

Geht nicht - gibt's nicht!


Bei einigen Aufgaben und Anwendungen reicht das bema Standardprogramm nicht aus, um Ihre Anforderungen optimal zu erfüllen.
In diesen Fällen können wir Ihnen eine Vielzahl von Sonderbaulösungen anbieten.